Need help?Do you have a question about the SENSECAP M2 and is the answer not in the manual?
General| Model | SENSECAP M2 |
|---|---|
| Category | Gateway |
| Storage | 8GB eMMC |
| Ethernet | 10/100 Mbps |
| Communication Protocol | LoRaWAN |
| Operating System | Linux |
| Storage Temperature | -40°C to 85°C |
| Memory | 1GB DDR4 |
| Connectivity | LoRa, Wi-Fi, Ethernet |
| Wi-Fi | 802.11 b/g/n |
| Power Supply | 5V/2A |
| LoRa Frequency | EU868, US915, AS923 |
| Humidity | 10% to 90% (non-condensing) |
| Processor | Quad-core ARM Cortex-A53 |
Connect the Ethernet cable for wired internet access. Solid green LED indicates successful connection.
Activate AP hotspot by pressing button, then connect your computer to the SenseCAP network.
Use device label credentials and IP address to access the gateway's local console.
Navigate to Wireless settings, scan for networks, and select your Wi-Fi to join.
Interpret LED colors and blinking patterns to diagnose gateway operational status.
Verify gateway connectivity by checking the 'Online status' within the SenseCAP Mate App.
Download the SenseCAP Mate App from the App Store or Google Play Store.
Register for an account if new, then log in to the SenseCAP platform.
Use the app's 'Add device' feature to scan the gateway's QR code.
Configure the device name and physical location for the gateway after successful binding.
Power on the sensor and press its button until the indicator blinks slowly.
Choose the sensor type and click 'Setup' to connect via Bluetooth.
Set the sensor's frequency plan to match your gateway's frequency.
View gateway information and status on the SenseCAP Portal and Mate App.
Monitor sensor measurements like temperature, humidity, and CO2 on the Portal and App.
To Next Page