EasyManua.ls Logo

Sentinel KalGuard User Manual

Default Icon
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Page 1
KalGUARD
®
Installation Manual
Water Treatment Equipment to
Manage Hardwater Limescale
Version 3 – April 2018
IMPORTANT
Please leave a copy of this
manual with the KalGUARD
equipment in its plant room
Question and Answer IconNeed help?

Do you have a question about the Sentinel KalGuard and is the answer not in the manual?

Sentinel KalGuard Specifications

General IconGeneral
BrandSentinel
ModelKalGuard
CategoryWater Filtration Systems
LanguageEnglish

Summary

SYSTEM AND COMPONENT ARRANGEMENT

KalGUARD Anode Unit

Component description for zinc ion dosing to inhibit scale formation.

KalGUARD Controller

Device linking water meter to anode for intelligent zinc dosing.

25/55 µM Water Filter

Filter for incoming mains water to ensure optimum equipment performance.

Water Meter

Provides data to the controller for intelligent activation of the anode unit.

TYPICAL INSTALLATION

GENERAL NOTES

Installation Requirements

Covers required items, lagging, access, and meter compatibility.

System Configuration

Discusses installation location preference and side-stream configuration.

Operational Aspects

Details system intelligence and WRAS approval for health and safety.

PRINCIPLE INSTALLATION GUIDELINES

INSTALLATION SCHEMATICS

Schematic 1: Horizontal Pipe

Diagram for horizontal pipe mounted on a wall, above ground level.

INSTALLATION SCHEMATICS (continued)

Schematic 2: Horizontal Pipe

Diagram for horizontal pipe run at low level, just above floor level.

INSTALLATION SCHEMATICS (continued)

Schematic 3: Vertical Pipe

Diagram for vertical pipe where main water feed comes through the floor.

CONCLUDING THE INSTALLATION

Pipework Sanitation

Mentions sanitation of pipework and KalGUARD equipment.

PREPARING THE KALGUARD FOR COMMISSIONING

MK1 KALGUARD CONTROLLER

Correct Operating Voltage

Explains voltage settings and adjustments for the controller.

Power Supply Connection Point UK

Details the required electrical supply for the unit.

Power Connection Point on the Controller

Specifies how to connect the power cable to the controller terminals.

Functions within the Terminal Enclosure

To Anode Unit

Describes connecting the output control cable to the anode unit.

Set Anode Unit Current

Explains the coarse control for anode unit current setting.

Water Meter Fitted

Details how to connect the water meter cable to the controller.

MK1 KALGUARD CONTROLLER (continued)

BMS Monitoring Fault Mode

Explains the BMS fault warning function and ratings.

BMS Monitoring Water Usage

Describes using a Pulse Splitter for BMS water usage monitoring.

F2

Identifies the secondary control-gear back-up fuse.

MK2 KALGUARD CONTROLLER

Mains Power Connection

Outlines the required mains power supply and connection.

Electrical Connections to Anode Unit, Water Meter and BMS

Details wiring connections for the anode unit, water meter, and BMS.

MK2 KALGUARD CONTROLLER (cont.)

Primary Connections

Covers connections to the anode unit and water meter.

BMS Connectivity

Details controller override and BMS monitoring functions.

Fuse and Starting Up

Covers the fuse and initial startup procedure for the controller.

USING A WATER METER TO CONTROL THE WATER TREATMENT PROCESS

WATER FILTRATION

Technical Questions

Provides contact information for technical queries regarding filtration.

Pulse Splitter User Instructions

Specification

Lists technical specifications for the pulse splitter.

Installation

Provides essential steps for securely mounting and installing the pulse splitter.

WIRING

HEALTH & SAFETY

Zinc in Drinking Water Supplies

Explains the safety and health aspects of zinc dosage in water.

Servicing & Monitoring

Servicing Contract

Details Sentinel's service contract for optimal operation and efficacy.

Recommended Monitoring

Outlines weekly and half-yearly checks, including flushing and filter cleaning.

Service Considerations & Automatic Servicing

Covers anode unit replacement, service contracts, and automatic servicing.

Related product manuals