1
1. Product Introduction
Thank you for purchasing the Digital Tachometer.
The Digital Tachometer is Contact and Non-Contact
RPM (revolutions per minute) measuring instruments.
Features include a 5 digits LCD, scan/hold function
and auto power off (30 seconds). To measure, point
the Laser spot or bring the contact probe to the object.
Press the measuring trigger and hold on till the reading
is stable and end of shot.
1-1 Features
Measurement type : Rotation Speed (RPM)、
Non-contact RPM measurements up to 100cm
away from target.
Laser sighting.
Contact measurements can be made with included
contact adapters.
5 digital microprocessor-controlled LCD display.
40 r ea di ng m e m o r i e s : 1 0 s e l e c t a b l e M A X
10 selectable AVG measurements and 10 selectable
DATA measurements.
Ultra low power consumption in shutdown mode.
Total revolutions (REV)、Surface Speed (I/M、
M/M、Y/M、F/M) and Length(M、YD、FT).
measurements, 10 selectable MIN measurements,
To Next Page
Loading...