SolaSmart™ Plus Installation Guide
Version 1.1 – Mar 2012 Page 10
POWERING UP
Before you
Connect the
Power
Before you power up, make sure you have:
Read the safety instructions, warnings and liability statements.
Completed installation.
Securely mounted the unit in place before you connect power to the unit.
Checked that no water, metal shavings or other electrical hazards are
anywhere near the plug, socket and/or surrounding environment.
NOTE:
The power outlet socket must be installed by a registered electrician.
The SolaSmart™ must be installed by a qualified person.
Ensure suitable over-current protection and RCD protection for the
SolaSmart™ is in place.
The mechanical hot water thermostat for the electric element should be set
to the maximum for the HWC Control Mode to operate correctly. (The hot
water thermostat is only used as a failsafe feature and normally will not
operate.)
Continued on next page
To Next Page
Loading...
Need help?
General