Need help?Do you have a question about the Sepura STP8000 and is the answer not in the manual?
General| Frequency Range | 380-430 MHz |
|---|---|
| Audio Output | 1 W |
| Ingress Protection | IP67 |
| Encryption | AES |
| RF Power Output | 1 W |
| Operating Temperature | -30°C to +60°C |
| Channels | Up to 1000 channels |
| Battery Life | Up to 14 hours (depending on usage) |
| Water Resistance | IP67 (Submersible to 1m for 30 minutes) |
Details compliance with radiation protection, EMC, and environmental standards for Sepura radios.
Regulatory statements specific to North American and Canadian markets for Sepura products.
Details the temperature and humidity ranges for radio operation and storage.
Lists IP, IEC, and ATEX certifications for various Sepura radio models.
Illustrates and labels the front view components of STP8000, STP8100, STP8200 radios.
Illustrates and labels the front view components of the STP8X handheld radio.
Shows and labels the rear view components of STP8000, STP8100, STP8200 radios.
Illustrates and labels the rear view components of the STP8X handheld radio.
Illustrates and labels the front view components of the SRH3500, SRH3800, and SRH3900 handheld radios.
Shows and labels the rear view components of the SRH3500, SRH3800, and SRH3900 handheld radios.
Explains procedures for opening and closing SIM/SD card covers on different radio models.
Provides instructions and warnings regarding antenna fitting and usage for STP8X radios.
Identifies the facility connector on STP8000, STP8100, STP8200 and its absence on STP8X.
Details the rugged accessory connectors (RSM, RuSC) on STP8000, STP8100, STP8200 and STP8X radios.
Step-by-step guide for installing and removing batteries from STP8000, STP8100, STP8200 radios.
Instructions and warnings for charging Sepura radio batteries, including safety precautions.
Specific instructions and warnings for fitting, removing, and using STP8X radio batteries.
Details how to attach and detach belt clips and Klick Fast studs to the radio.
Identifies the facility connector and accessory socket on SRH radios.
Provides instructions and safety precautions for charging SRH series radio batteries.
Details the components and connection points of the SRG3000 Mobile/Gateway Transceiver.
Illustrates and labels the components of Standard and Colour Consoles for SRG3000.
Shows and labels the front and rear components of the Handset Based Console.
Illustrates the Applications Interface Unit and its connection ports.
Lists and describes console and audio accessories compatible with mobile/gateway radios.
Explains how audio is controlled for calls using various accessories with mobile/gateway radios.
Provides guidelines for safe radio usage, environmental limits, and cleaning procedures.
Details safety precautions for handling, charging, and disposing of radio batteries.
Outlines safety requirements and warning messages for using third-party accessories with Sepura radios.
Explains the Transmit Inhibit mode and proper antenna usage, including warnings.
Refers to the Regulatory Statements section for information on compliance with standards.
Provides contact information for Sepura plc, including web, telephone, and fax numbers.
To Next Page
