Warning! STP8X Series terminals must not be used without the covers fitted.
Using the STP8X terminal without covers fitted may invalidate the compliance
rating of the product.
Antenna
You can clean the antenna connector on the terminal and the connector on the
antenna using a soft brush. If you have removed the antenna, refit the antenna and
secure to finger-tight and then apply another 1/4 turn.
Battery compartment contacts
Before cleaning, power off the terminal then remove the battery.
Remove the battery and clean the contacts inside the compartment using a dry lint
free soft cloth or soft brush.
Warning! Do not use a damp cloth or other cleaning fluids on the battery
compartment contacts.
The contacts on the battery can be cleaned using a dry lint free soft cloth or soft
brush.
5
To Next Page
Loading...