Specialist cleaning
Sometimes the terminal may be subjected to conditions that require additional
cleaning such as salt water, mud, body fluid and foul substances such as sewage.
If the product has been subjected to contamination, seek advice from your local
Health and Safety authority.
Sanitising
If sanitation of the terminal is required, Clinell universal sanitising wipes may be
used.
Caution! Regular use of this sanitising product may degrade the hard coat
protection of the product key mat.
Always read the instructions for using the sanitising product carefully and obey all
safety instructions relating to the use of the cleaner.
Salt water
Salt water is a corrosive and may damage the terminal. Use a protective case to
reduce the risk the potential risk of damaging the product in this enviroment.
If the STP9000 or STP8X terminal is exposed to salt water, clean as follows:
Briefly immerse the product into fresh clean water.
Gently shake the terminal to clear any water from behind the keypad.
Allow the terminal to dry before operating. Do NOT dry the terminal using a
microwave oven or other heating device.
Important note! For all other terminals, contact with salt water should be
avoided.
6
To Next Page
Loading...