Need help?Do you have a question about the Sequential Prophet-5 1000 and is the answer not in the manual?
General| Polyphony | 5 voices |
|---|---|
| Oscillators | 2 per voice |
| Waveforms | Sawtooth, Square, Pulse |
| Filter | 4-pole low-pass |
| Keyboard | 61 keys |
| Memory | 40 program memories |
| Type | Analog Synthesizer |
Details on power voltage, fuse, grounding, and connecting to amplifiers.
Steps for powering on the synthesizer and performing initial tuning.
How to select factory programs, files, and banks on the Prophet-5.
Guide to editing existing programs and recording new ones.
Explanation of PRESET, MANUAL, and RECORD modes of operation.
Detailed breakdown of the audio signal path through the voice modules.
Description of the controls for Oscillator A (frequency, shape, pulse width).
Description of the controls for Oscillator B (frequency, fine, shape, pulse width, LFO).
Details on the filter controls (cutoff, resonance, envelope amount).
Explanation of amplifier controls (attack, decay, sustain, release).
Explanation of WHEEL-MOD and POLY-MOD modulation systems.
Explanation of how the cassette interface saves and loads programs.
Step-by-step procedure for saving programs to cassette tape.
Step-by-step procedure for loading programs from cassette tape.
How to enter and operate Scale Mode, and switch between modes.
Details on unique status bytes for sequencer communication.
Description and notes for the original 40 factory sounds in File 1.
To Next Page
