Need help?Do you have a question about the Sequential PRO 3 and is the answer not in the manual?
General| Polyphony | Monophonic/Paraphonic |
|---|---|
| Arpeggiator | Yes |
| Type | Hybrid Synthesizer |
| Oscillators | 3 (2 VCOs) |
| VCO 1 | Analog Voltage Controlled Oscillator |
| VCO 2 | Analog Voltage Controlled Oscillator |
| Effects | Delay, Reverb, Chorus, Distortion |
| Keyboard | 37-key semi-weighted with velocity and aftertouch |
| Connectivity | USB, MIDI In/Out/Thru, CV In/Out |
| Envelopes | 4 |
| MIDI | In/Out/Thru |
| Audio Inputs | 1x 1/4" |
| Headphones | 1/4" stereo headphone out |
| Sequencer | 64-step polyphonic sequencer |
Explains waveform generation from analog and digital oscillators.
Details controlling levels of sound generators like oscillators and noise.
Describes the three distinct analog filter types and their characteristics.
Explains the 5-stage envelope generator for controlling overall volume.
Details the three LFOs used for periodic modulation.
Explains using modulation sources and destinations for sound shaping.
Covers adding two digital effects like delay, reverb, chorus, etc.
Explains how the arpeggiator generates patterns from held chords.
Details the 16-track sequencer for creating note and parameter patterns.
Common issues and solutions for Pro 3 operation and sound.
Information on how to get assistance for Pro 3 issues.
Procedure for auto-calibrating oscillators and filters.
Steps to recalibrate the pitch and modulation wheels.
Procedure to reset global parameters to factory defaults.
To Next Page
