Sequential PRO 3 - Modulation

46
Modulation
Sequential
TAB 3 - LFO Dest
Destination
LFO ControlLFO Shape
DESTINATION
Osc All Freq
LFO Dest
Destination: Routes the selected LFO to one of the many modulatable
destinations within the synthesizer. You can also use the modulation
matrix to route an LFO to additional destinations.
There is a shortcut for routing an LFO to a front-panel destination (provided
that the destination is a valid destination). Simply hold down the selector button of the
desired LFO or the LFO’s destination button, then move the knob or control you want
to use as a destination (the lter cutoff, for example). Set the amount using the LFO
amount knobs. Be aware that not all front-panel controls can be used as a modulation
destinations.
Modulation
Although the overall sonic character of the Pro 3 is determined by its
oscillators and lters, much of its power to make truly unique sounds
comes from creative use of modulation. Modulation is the process of
routing one parameter (used as a control voltage) to another parameter in
order to change the way the targeted parameter behaves.
DestinationEdit Mod 1 Source Amount
Sort SourceSlot Sort
Mod 1
Mod 2
Mod 3
Mod4
Slider 1
Slider 2
Aftertouch
Mod Wheel
60
35
25
80
Cuto
Osc1 Shape
Drive
LFO1 Amt
Sort Dest
The Modulation Matrix