81
Pro 3 User’s Guide
Tuned Feedback
6. Set the Feedback parameter to 12
7. Set the Filter Envelope’s and parameters to shape the
envelope of the generated sound.
8. Experiment with the Feedback A parameter and the ADSR
parameters of Aux Envelope 1 to shape the harmonic content of the
generated sound.
Feedback Parameters
Amount: -127...+127—Sets the level of feedback. As the amount goes
up, the feedback will eventually oscillate at the frequency set with the
tuning parameter. Medium levels of feedback add depth and movement
to the sound.
Tuning: 0...48—Sets the base frequency of the feedback loop. It steps
in semitones from C0 to C4 (0-48) for a four octave range. The exact
frequency is inuenced by factors such as lter cutoff frequency and the
number of poles in the lter, which can drive it slightly sharp or at.
Grunge: On, Off—When on, this enables extreme feedback at higher
levels. It has no effect at lower levels of feedback.
To Next Page
Loading...
