Need help?Do you have a question about the Sercomm xCAM and is the answer not in the manual?
General| Night Vision | Yes |
|---|---|
| Connectivity | Wi-Fi |
| Storage | MicroSD card slot |
| IR Distance | Up to 10 meters |
| Wireless | 802.11 b/g/n |
| Protocols | RTSP |
| Operating Temperature | -10°C to 50°C |
| Resolution | 1920x1080 (Full HD) |
Congratulates on purchase and describes the xCAM as a high-definition IP camera with WiFi connectivity.
Highlights key features like standalone design, dual video compression, suitability for various environments, and IR LED support.
Details the camera's support for the 802.11n standard and wired/wireless network connectivity.
Describes the front panel components of the xCAM, including IR LEDs, lens, and power indicator status.
Details the rear panel components of the xCAM, including RJ-45 jack, reset button, and microphone.
Details the physical components and indicators of the XW3 device, including LAN port, reset/WPS buttons, and power indicator.
Outlines the system requirements for using the wireless interface, specifying compliance with IEEE 802.11 standards.
Provides step-by-step instructions for adding the xCAM to the network and installing it.
Guides on how to place and connect the xCAM and XW3 units for initial setup.
Details the procedure for permanently mounting the xCAM to a wall using drilling and screws.
Lists technical specifications for the xCAM, including model, dimensions, operating temperature, video compression, and interfaces.
Details technical specifications for the XW3, including model, operating temperature, network interface, and buttons.
Provides FCC statements, radiation exposure information, and compliance details for the product.
To Next Page
