Serene DAC-202 User Manual

Oaktree Products, Inc
800.347.1960
otp@oaktreeproducts.com
WHEN BACK OF TELEVISION LOOKS SOMETHING LIKE THIS:
IT IS NECESSARY TO PURCHASE THE DAC-202 TO MAKE YOUR TV
LISTENING SYSTEM WORK
The DAC-202 COMES WITH THE FOLLOWING COMPONENTS:
TV missing
traditional red,
white and yellow
RCA cable
connections
labeled AUDIO OUT
(note: AV OUT is NOT
same as AUDIO OUT)
TV Digital Connector
AC Adapter
Digital Optical Cord*
*remove plastic tip covers from optical cord plugs

Serene DAC-202 Specifications

General

Input	USB, Optical, Coaxial
Output	RCA
Sample Rate (USB)	384kHz
Supported Sample Rates	44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz
Bit Depth (USB)	32bit
Bit Depth	16bit, 24bit
Power Supply	DC 5V

Summary

Introduction to TV Audio Connectivity

TV Audio Port Identification

Differentiates between AUDIO OUT and AV OUT ports on TVs, explaining the need for DAC-202.

DAC-202 Package Contents

Lists all components included with the DAC-202 for setup.

Setting Up the TV Listening System

Connecting the TV Listening Device

Connects the TV listening device to its audio input using provided cables.

Using the RCA Adapter Y-Cord

Details the connection of the audio cable to the RCA adapter Y-cord.

Connecting the DAC-202 to TV

Connecting Device to DAC-202

Connects the TV listening device's audio cable to the DAC-202's R-L output.

Locating TV Optical Port

Identifies the OPTICAL port on the back of the TV for connection.

Preparing TV Optical Port

Instructions on removing a rubber flap covering the TV's optical port.

Finalizing Connections and Power

Connecting Digital Optical Cord

Connects the DAC-202's optical port to the TV's optical port.

Connecting Power Adapter

Connects the AC adapter to the DAC-202 and a wall outlet.