The F110-13 Manual is to be downloaded from the
SERPENT web page, easily read with full colour pictures of the processes
you’re undertaking.
I have built all the SERPENT Off Road Range 811T, 811B, 811Be and
never have I come across any mishaps with installing or with any parts
supplied in their kits, Top Quality___ that’s it, and after opening the box
that’s exactly what I got - QUALITY!!!!
The first process was to CA glue around all the edges of the CF (carbon
fibre) to prevent it from possibly splitting I found the best way was to
pour a dab of the CA glue on to a piece of plastic cut off the parts frame,
using the round end and run along the side of the CF, I coated it twice.
To Next Page
Loading...
