EasyManua.ls Logo

Serpento PYTHON 250 - Handlebar Switches

Serpento PYTHON 250
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MANUAL DEL USUARIO • Python 250
15
C2) Hotate the throttle t·wist grip hv 1/8 to 1/4 turn.
)Start the engine hv the electrir- or the kick starting svstem.
C{; Slighllv turn the throttle Lwisl grip to increase the speed of the engine so as to \·vann up the engine.
(;’ )Turn Lhc carburetor choke bar dmvmvm·d to “D”,lully open the choke \d-ten the en rine i::-; sufciently \Ymmed up.
Caution
The en{fine can only he started alter the neutral position is ascertained.Otherwise accident will happen.
Unnecessary idle runninx(especialy at a hi/(h speed)is harmiul to the enxine.
Procedureol lopping engine:
(i) Release the Lhroltk L\·viHl grip to low dmvn the engirw
i_:ZYl’urn to the neutral position.
Gf)Set the ignition swit<”h kev to “OFb’” position.
(4) Set the fuel coek(the fuel tank valve)handle to ‘’OFF” position.
Switc.hts on Ri ht Handlt har
Start button Thorttlc twist !!,rip

Table of Contents

Related product manuals