SetPower X50 - Settings Menu

3 Settings Menu.
With the unit turned on, press and hold the setting Button “ ”
for 3 seconds to enter into the Settings Menu, which contains
three functions, Battery Protection Settings(H/M/L), °C / °F
Settings and MAX/ECO Settings. The target setting will
flash on the gauge when press and hold the setting Button
“ ” for 3 seconds, which means that the unit enter into the
setting menu. Then short press the setting button “ ” to
choose the 3 of functions when enter into the
Settings Menu.
a) MAX / ECO Settings: Short press “+” or “-” button to
toggle between MAX and ECO when MAX / ECO flashes
on the gauge.
b) °C / °F Settings: Short press “+” or “-” button to toggle
between °C and °F when °C / °F flashes on the gauge.
c) Battery Protection Settings: Short press “+” or “-” button
to switch H / M / L when H / M / L flashes on the gauge.
Battery protection Level
Power
Source
Mid Level is the Default Setting
HIGH MID LOW
Start-up Cut-off Start-up Cut-off Start-up Cut-off
12V
24V
12.4V
25.7V
11.1V
24.3V
11.7V
24.2V
10.4V
22.8V
10.9V
22.7V
8.5V
21.3V
Protection
Level
07