Setra Systems Flex - Home Screen Overview

• Use “Device Conguration” for initial setup.
• The next seven menus (three tiles over four) permit complete
conguration of your FLEX unit. Detailed instructions for each
menu can be found in the FLEX Installation & Operations Guide.
© Setra Systems, Inc. All Rights Reserved. The Setra Systems name and logo are registered trademarks of Setra Systems, Inc.
Room name
(Up to 3 congured))
Room navigation,
to view home screen of
rooms 2 and 3
Full screen mode
Set up unit
Banner indicates room
condition: NORMAL,
WARNING, ALARM,
or STANDBY
Two icons enable alarm
silencing. latch alarm
reset, or door indicator
Badges 5 and 6
(if congured) appear
off-screen and can be
accessed by swiping
left of right
Pull-down room
proles, user-dened,
to set new monitor
and control setpoints
in effect
Badges show room
parameters, values,
units, and state
Select from 32 icons
to represent room
use or none
Two lines of text
provide notices to
staff, or none
6. FLEX Home Screen