29
9. The appliance should be cleaned immediately after
use, see Cleaning the juicer on page 26.
8 Disassembling the juicer
1. Disconnect the unit from the mains.
2. To open the lid, turn it anti-clockwise until the arrow
on the lid is aligned with the arrow on the motor
unit.
3. Take off the lid.
4. Remove the bowl from the motor unit.
5. Remove the scraper (with the micro sieve) and the
spiral juice extractor from the bowl; it may have to
be turned slightly.
6. Separate the scraper from the micro sieve.
7. Remove the spiral juice extractor from the micro
sieve, turning it back and forth if necessary.
Ü The individual components of the juicer can
now be cleaned separately (see Cleaning the
juicer on page 26).
To Next Page
Loading...
