SEVERIN HV 7147 - Page 25

25
insTallinG anD charGinG ThE appliancE
Vacuum cleaning
For further tips, see  Quick Start Guide  Operation.
Select one of the following attachments from the scope of delivery for different applications:
Attachment Application
Turbo brush with rotating brush roller Cleaning of hard oors, short-pile carpets or upholstery
Long crevice tool
Short crevice tool/furniture brush
Cleaning of hard-to-reach places.
Cleaning of furniture with the attachable furniture brush.
Flexible crevice tool Cleaning of hard-to-reach places, e.g. under car seats
Suction tube and oor nozzle with
adapter
Cleaning of hard oors and short pile carpets
Rubber nozzle Absorption of liquids
Without
The appliance can also be used without an additional nozzle or
brush. It is not possible to absorb liquids without an additional
nozzle.
TIP: Always adhere to the cleaning and maintenance instructions of the oor covering, carpet or furni-
ture manufacturer. Only use undamaged nozzles. Damaged nozzles can scratch surfaces.
Vacuuming in Eco mode
Vacuuming is carried out with reduced power in Eco mode. The appliance consumes less energy and the
operating time of the rechargeable battery is extended. The brush roller also rotates if the oor nozzle is
attached.
1. Attach an additional attachment to the appliance if necessary.
2. Push the On/Off switch to the “I” position to switch on the appliance.
 The appliance vacuums in Eco mode.
 The LED on the handle lights up orange.
 The LEDs on the top of the appliance illuminate the work area.
3. Vacuum the surface.
4. Push the On/Off switch to the “0” position to switch off the appliance.
5. Empty and clean the dust container („Cleaning the dust container and lter“ auf Seite 26).
TIP: The LED on the handle starts ashing when the battery charge is running low.
The appliance switches off automatically when the battery charge is too low. Charge the rechargeable
battery („3 Installing and charging the appliance“ auf Seite 24).