SEVERIN SC 7141 - Assembling and Charging Rechargeable Battery 23

23
asseMbling anD charging rechargeable baTTery
3 Assembling and charging rechargeable battery
Assembling
1. Unpack the appliance and accessories.
2. Check the content to make sure it is undamaged and complete. In the event of transport damage or
missing parts, immediately contact the dealer.
3. Install the cleaning head to the housing of the window cleaner. Turn cleaning head until the marking on
the cleaning head and on the housing form a solid line.
4. Insert dirty water tank at base of window cleaner.
 The dirty water tank clicks into place.
5. Attach microbre pad to spray bottle.
For additional assembly tips, see also > illustrated Quick Start Guide.
Charging the rechargeable battery
WARNING!
Use only the USB cable provided and a suitable adapter (charging voltage 5 V DC, at
least 1000 mA) to charge the rechargeable battery of the window cleaner. There is a risk
of re and explosion!
1. Set up window cleaner in a place that meets the following conditions:
 at surface
 near a socket
 away from sources of heat and moisture
2. Connect micro USB B plug to the socket at the rear of the window cleaner.
3. Connect USB plug to a suitable adapter (not included in scope of delivery).
NOTE:
USB adapter for socket (not included in scope of delivery):
Output: 5 V DC; minimum 1 A
4. Connect adapter to a socket (230 V).
 The blue light on the window cleaner ashes during the charging process.
5. Wait approx. 2.5 hours until the blue light stays on permanently.