Assembly Instrucons
STEP 1. Remove AIRLIFT™ DESK (A) from box and set on at table. Weighs 50.7 lbs.
STEP 2.
Cut the plasc es on
both sides of the
AIRLIFT™ DESK (A).
STEP 3. Plug POWER CORD (G) into wall socket.
Safety
DO NOT place devices on desk edge.
DO NOT quickly li desktop when loaded.
DO NOT route wires through desk legs.
MAKE SURE devices have cables long
enough for the full-range (15 in/38 cm) of
height-adjustment.
Requires 2
people to li
Failure to follow these instrucons may result in
property damage or personal injury