Need help?Do you have a question about the SEW-Eurodrive EI7 Series and is the answer not in the manual?
Lists recommended accessories for performing encoder installation and replacement tasks.
Provides guidance on the proper disposal of electronic waste and materials.
Detailed steps for converting encoder generation A to generation B on motors without a brake.
Detailed steps for converting encoder generation A to generation B on motors with a brake.
Detailed steps for replacing an encoder generation B with a new one on motors without a brake.
Detailed steps for replacing an encoder generation B with a new one on motors with a brake.
Provides pin assignment details for the 8-pin M12 AVRE connector used with the encoder.
Provides pin assignment details for the 4-pin M12 AVSE connector used with the encoder.
Details pin assignments for encoder connections that do not use an M12 connector.
General| Category | Media Converter |
|---|---|
| Interface Type | Ethernet |
| Operating Voltage | 24 V DC |
| Protection Class | IP20 |
| Housing Material | Plastic |
| Mounting | DIN Rail |
| Product Series | EI7 |
| Data Rate | 100 Mbps |
| Storage Temperature | +70 °C |
To Next Page
