EasyManua.ls Logo

SEW-Eurodrive SA37 - User Manual

SEW-Eurodrive SA37
160 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Drive Technology \ Drive Automation \ System Integration \ Services
Explosion-Proof
Gear Units R..7, F..7, K..7, S..7 Series,
Spiroplan® W
Operating Instructions
Edition 05/2008
11630213 / EN

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the SEW-Eurodrive SA37 and is the answer not in the manual?

Summary

2 Safety Notes

2.1 Preface and General Information

Introduces safety notes and warns about hazards like moving parts, hot surfaces, and explosive atmospheres.

2.7 Extended Storage to 2.10 Inspection;Maintenance

Refers to specific sections for extended storage, installation, startup, and maintenance.

3 Checklists

3.1 Before Startup Checklist

Checklist for activities before startup in potentially explosive atmospheres.

3.2 During Startup Checklist

Checklist for activities during startup in potentially explosive atmospheres.

5 Mechanical Installation

5.1 Installation Prerequisites and Tools

Lists required tools, resources, and assembly prerequisites for mechanical installation.

5.3 Gear Unit Installation Procedures

Provides detailed steps for installing the gear unit, including mounting positions and tightening torques.

5.5 Category II2 GD Gear Units and Gearmotors

Details requirements for gear units/gearmotors in category II2GD for explosive atmospheres.

6 Startup

6.1 Checking Oil Level and 6.2 Temperature Measurement

Instructions for checking oil level and measuring surface/oil temperatures before startup.

7 Inspection;Maintenance

7.1 Preliminary Work and 7.2 Intervals

Safety precautions before maintenance and inspection/maintenance intervals.

7.3 Lubricant Change Intervals

Provides a chart showing lubricant change intervals based on operating hours and temperature.

7.7 Inspection;Maintenance for the Gear Unit

Overview of gear unit inspection and maintenance based on type, size, and position.

8 Mounting Positions

10 Malfunctions;Service

10.1 Gear Unit Malfunctions and Remedies

Lists common gear unit malfunctions, their possible causes, and remedies.

Summary

2 Safety Notes

2.1 Preface and General Information

Introduces safety notes and warns about hazards like moving parts, hot surfaces, and explosive atmospheres.

2.7 Extended Storage to 2.10 Inspection;Maintenance

Refers to specific sections for extended storage, installation, startup, and maintenance.

3 Checklists

3.1 Before Startup Checklist

Checklist for activities before startup in potentially explosive atmospheres.

3.2 During Startup Checklist

Checklist for activities during startup in potentially explosive atmospheres.

5 Mechanical Installation

5.1 Installation Prerequisites and Tools

Lists required tools, resources, and assembly prerequisites for mechanical installation.

5.3 Gear Unit Installation Procedures

Provides detailed steps for installing the gear unit, including mounting positions and tightening torques.

5.5 Category II2 GD Gear Units and Gearmotors

Details requirements for gear units/gearmotors in category II2GD for explosive atmospheres.

6 Startup

6.1 Checking Oil Level and 6.2 Temperature Measurement

Instructions for checking oil level and measuring surface/oil temperatures before startup.

7 Inspection;Maintenance

7.1 Preliminary Work and 7.2 Intervals

Safety precautions before maintenance and inspection/maintenance intervals.

7.3 Lubricant Change Intervals

Provides a chart showing lubricant change intervals based on operating hours and temperature.

7.7 Inspection;Maintenance for the Gear Unit

Overview of gear unit inspection and maintenance based on type, size, and position.

8 Mounting Positions

10 Malfunctions;Service

10.1 Gear Unit Malfunctions and Remedies

Lists common gear unit malfunctions, their possible causes, and remedies.

SEW-Eurodrive SA37 Specifications

General IconGeneral
BrandSEW-Eurodrive
ModelSA37
CategoryEngine
LanguageEnglish

Related product manuals