13
Threading the sewing machine
5. As shown, pull the thread down into the tension
regulator.
Unlike the tension discs on most sewing
machines, the tension discs on the upper
thread tension regulator are not visible, so
checking very carefully that the thread is
between the tension discs.
6 Then pass the thread between the tension discs of
the upper thread tension regulator.
.
Turn the hand wheel, if necessary, in order to
raise the thread take-up.
17
10
7. Then insert the thread from right to the left in the
hook of the thread take-up .
8. As shown, pass the thread through the thread guide
on the needle holder. Finally take the thread through
the eye of the needle.
10
17
To Next Page