Do you have a question about the SFA Sanipack ON01-K70 and is the answer not in the manual?
Model | Sanipack ON01-K70 |
---|---|
Other Inlets | 2 |
Discharge Pipe Diameter | 32 mm |
Inlet Diameter | 40 mm |
Outlet Diameter | 32 mm |
Overview of the SANIPACK as a compact pump/macerator for domestic use.
Specifications including application, type, voltage, frequency, power rating, and IP rating.
Instructions for fitting the SANIPACK behind a wall or inside a stud wall.
Provides dimensions for an access panel required for unit removal and service.
Details on connecting the flexible sleeve to a toilet spigot or drain pipe.
Instructions for connecting to side inlets using connector A and securing with a clamp.
Guide for connecting the hand basin drain pipe to the 1 1/2-inch connector.
Steps for connecting the discharge pipe, including flap direction and valve recommendation.
Requirements for the 110 volt, 60HZ supply and GFCI receptacle.
Procedure for flushing the toilet and running the basin/shower after connection.
Information on normal operation, suitable waste, and prohibited items.
Recommendations for cleaning and descaling the unit, including a specific procedure.
A table listing symptoms, probable causes, and remedies for operational issues.
Instructions for safely disconnecting and removing the unit from the wall hung toilet.
Details on the 2-year guarantee subject to correct installation and usage.