SFA SANICOM 1 User Manual

1
NOT1203
12.2020
Sanicom® 1
Sanicom® 2
IMPORTANT/IMPORTANTE
DO NOT RETURN ANY MERCHANDISE TO THE VENDOR.
NE PAS RETOURNER DE MARCHANDISE AU VENDEUR.
NO REGRESE NINGUNA MERCANCÍA AL VENDEDOR.
For Customer Service, Returns or Technical Questions, please call Saniflo’s Technical support toll-free at 800-571-8191 (USA) or 800-363-5874 (CDN).
Pour le service client, les retours ou toute question technique, merci d’appeller le service technique de Saniflo au numéro suivant : 800-571-8191
(USA) or 800-877-8538 (CDN).
Para el servicio al cliente, devoluciones o preguntas técnicas, por favor llame al soporte técnico de Saniflo sin cargo al 800-571-8191 (USA)
This product must be installed in strict accordance with local plumbing codes. Product should be installed by a licensed plumber.
Le produit doit être installé dans le respect des règlements sanitaires locaux. Le produit doit être installé par un plombier qualifié.
El producto debe ser instalado en estricto acuerdo con los códigos locales de plomería. El producto debe ser instalado por un plomero con licencia.
C
US
C
US
USA CND
The user should retain these instructions for future reference.
À lire attentivement et à conserver à titre d’information.
El usuario debe mantener estas instrucciones para futura referencia.

SFA SANICOM 1 Specifications

General

Brand	SFA
Model	SANICOM 1
Category	Water Pump
Language	English

Summary

Description

Operating Principle

Explains the operating principle of Sanicom 1 and Sanicom 2 pumps, detailing dip tube functions.

Technical Data

Provides key technical specifications like maximum height, flow rate, voltage, and power consumption for both models.

Installation

Fitting

Details requirements for unit placement, ventilation, isolation valves, and discharge pipe design.

Electrical Connection

Crucial safety warning to disconnect power before making electrical connections.

Control Box Operation

Sanicom 1 Control Keypad Operation

Details general alarms, main alarm, level alarm, time alarm, and reset functions for the Sanicom 1 control box.

Sanicom 2 Remote Control Box Operation

Explains alarms, motor activation, and reset functions for the Sanicom 2 remote control box.

Fault Finding Guide

Alarm on Sanicom 1 Device

Guides on troubleshooting common alarm indicators for Sanicom 1, including LED status and possible causes.

Alarm on Sanicom 2 Control Box

Troubleshooting guide for Sanicom 2 alarms, covering siren, LED indicators, and possible causes.

Inspection and Maintenance

Inspection

Monthly user checks recommended, focusing on observing at least two starting cycles for proper system running.

Maintenance

Guidelines for professional maintenance intervals, checks, and reporting for lifting stations.

Maintenance Contract

Recommendation for users to establish a maintenance contract for regular servicing and checks.

Limited Warranty

General Warranty Terms

Covers the 2-year warranty period, differentiating between exchanges and repairs for the first and second year.

Terms and Conditions

Outlines conditions for warranty coverage, including proper installation, use, and reporting of defects.

Part or Product Exchange/Replacement

Procedure for requesting product exchange or replacement, requiring an RGA# or CAS#.

Limitations

Specifies items not covered by warranty, such as labor charges, and limitations on consequential damages.

Extended Warranty + 1

Details requirements for extending the warranty, including online registration and proof of purchase.

Warranty Coverage Exemptions

Lists actions that can damage the product and void the warranty, such as discharging certain substances.

Warranty Disclaimer

Disclaims all other warranties, express or implied, beyond the stated limited warranty.