SFA SANICOM 2 User Manual

1
NOT1203
12.2020
Sanicom® 1
Sanicom® 2
IMPORTANT/IMPORTANTE
DO NOT RETURN ANY MERCHANDISE TO THE VENDOR.
NE PAS RETOURNER DE MARCHANDISE AU VENDEUR.
NO REGRESE NINGUNA MERCANCÍA AL VENDEDOR.
For Customer Service, Returns or Technical Questions, please call Saniflo’s Technical support toll-free at 800-571-8191 (USA) or 800-363-5874 (CDN).
Pour le service client, les retours ou toute question technique, merci d’appeller le service technique de Saniflo au numéro suivant : 800-571-8191
(USA) or 800-877-8538 (CDN).
Para el servicio al cliente, devoluciones o preguntas técnicas, por favor llame al soporte técnico de Saniflo sin cargo al 800-571-8191 (USA)
This product must be installed in strict accordance with local plumbing codes. Product should be installed by a licensed plumber.
Le produit doit être installé dans le respect des règlements sanitaires locaux. Le produit doit être installé par un plombier qualifié.
El producto debe ser instalado en estricto acuerdo con los códigos locales de plomería. El producto debe ser instalado por un plomero con licencia.
C
US
C
US
USA CND
The user should retain these instructions for future reference.
À lire attentivement et à conserver à titre d’information.
El usuario debe mantener estas instrucciones para futura referencia.

SFA SANICOM 2 Specifications

General

Motor Power	400 W
Discharge Pipe Diameter	32 mm
Maximum Vertical Discharge	5 m
Maximum Horizontal Discharge	50 m
Number of Inlets	2
Operating Temperature	35°C
Max Flow Rate	100 L/min
Max Head	5 m
Power	400 W
Voltage	220-240 V
Frequency	50 Hz

Summary

Installation

Fitting Requirements

Details installation space, valves, discharge pipe, and ventilation requirements.

Electrical Connection Safety

Warns about electrical shock and mandates grounding for safety.

Control Box Operation

Sanicom 1 Keypad Operation

Explains Sanicom 1 keypad, LEDs, and alarm/reset functions.

Sanicom 2 Remote Operation

Details Sanicom 2 control box alarms, LEDs, buttons, and buzzer.

Fault Finding Guide

Sanicom 1 Faults

Lists common faults, causes, and actions for Sanicom 1.

Sanicom 2 Faults

Lists common faults, causes, and actions for Sanicom 2.

Inspection and Maintenance

Maintenance Procedures

Details inspection, maintenance intervals, and tasks for qualified personnel.

Warranty Coverage Exemptions