To Next PageTo Next Page
Need help?Do you have a question about the SFA Sanicondens Clim mini S and is the answer not in the manual?
General| Model | Sanicondens Clim mini S |
|---|---|
| Type | Condensate Pump |
| Max Head | 6 m |
| Power Consumption | 22 W |
| Thermal Protection | Yes |
| Application | Boiler condensate removal |
| Power Supply | 230 V / 50 Hz |
Always disconnect the electrical supply before carrying out any work on the unit.
Device is designed only for pumping water; must not run dry or be submerged.
Details the components included in the pump unit, such as the sensor, lid, filter, and reservoir.
Lists accessories provided with the unit, including rubber elbow, pipe, and vent connection.
Outlines sound level, maximum flow rate, and head specifications for the device.
Details the electricity supply requirements, power consumption, and thermal protection.
Instructions for positioning and fitting the level sensor unit correctly.
Guidance on where and how to install the pump unit, ensuring proper orientation and clearance.
Steps for connecting incoming condensate, pump outlet, and ensuring correct discharge height.
Instructions for connecting the level sensor to the pump and the unit's power supply.
Steps to check pumping direction, fill sensor, and verify pump operation.
Guidelines for regular maintenance, including cleaning components like the reservoir and filter.
Details the two-year guarantee subject to correct installation and usage.
