To Next PageTo Next PageWhat to do if my SFA Water Pump does not start?
If your SFA Water Pump isn't starting, first ensure it's properly plugged into the power supply. If it's plugged in, check the mains voltage in case of a power cut. Also, verify that the float is not blocked by cleaning the SANICONDENS® Plus tank. Finally, check and clean the SANICONDENS® Plus inlet pipe to ensure it is free from blockages.
What to do if SFA Water Pump does not lift?
If your SFA Water Pump isn't lifting, start by cleaning the non-return valve. If the issue persists, inspect and clean the discharge pipe to remove any obstructions.
Why my SFA SANICONDENS Plus does not lift?
If your SFA Water Pump isn't lifting, it could be due to a blocked non-return valve or a blocked discharge pipe. Try cleaning the valve and the discharge pipe to resolve the issue.
General| Type | Condensate Pump |
|---|---|
| Voltage | 230 V |
| Application | Condensate Removal |
| Power supply | 230 V, 50 Hz |
| Operating temperature | 35 °C |
| Hose connection | 15 mm |
| Protection class | Class II |
Describes how the pump starts and operates based on the float mechanism and condensate level.
References the provided documentation for the product.
Specifies the physical dimensions of the SANICONDENS® Plus unit.
Details the product's applications and lists key technical specifications like type, voltage, and power.
Presents graphical data illustrating the pump's performance characteristics.
Describes or illustrates the pump's capabilities for vertical and horizontal discharge.
Instructions for connecting the water inlet to the unit's cover.
Guidance on connecting the flexible hose to the discharge outlet.
Details on safe and correct electrical hook-up by qualified professionals.
Instructions for wiring the alarm detection system to the unit.
Illustrates a typical installation scenario of the SANICONDENS® Plus unit.
States compliance with European directives for electrical safety.
Provides guidance on diagnosing and resolving common faults.
Instructions for unit disassembly and maintenance by qualified personnel.
Outlines the warranty terms for the SANICONDENS® Plus unit.
