Need help?Do you have a question about the SFA SANICUBIC 2 Classic and is the answer not in the manual?
General| Power | 1100 W |
|---|---|
| Outlet Diameter | 50 mm |
| Voltage | 230 V |
| Number of Available Inlets | 2 |
| Protection Rating | IP68 |
| Activation | Automatic |
| Frequency | 50 Hz |
| Type | Submersible |
| Inlet Diameter | 100 mm |
| Protection Class | Class I |
Identifies and explains hazard symbols used in the manual for safety.
Details critical safety precautions for maintenance, inspection, and installation tasks.
Explains potential risks and warranty implications of not following manual instructions.
Provides detailed technical specifications for each SANICUBIC model.
Covers electrical characteristics, detection device tech specs, and dimensions for the control box.
Steps and considerations for physically placing the pumping station.
Instructions and safety warnings for connecting the device electrically.
Details on connecting inlet, discharge, and ventilation pipes, including safety notes.
Steps and prerequisites for initial setup and startup of the pumping station.
Instructions for operating the control box and its keypads/remote units.
Procedures for regular checks and upkeep of the pumping station.
To Next Page
