SFA SANISHOWER User Manual

SANISHOWER
120 V - 60 Hz - 3,5A - IP44
(class 1) - - 1/5 HP
3,5 KG - 7.7pounds
SHOWER
01.17
258
C
US
The user should retain these instructions for future reference
À lire attentivement et à conserver à titre d’information
IMPORTANT/ IMPORTANTE
DO NOT RETURN ANY MERCHANDISE TO THE VENDOR
NE PAS RETOURNER DE MARCHANDISE AU VENDEUR
For customer Service, Returns or Technical Questions, please call Saniflo’s Technical support toll-free at
800-571-8191 (USA) or 800-363-5874 (CDN).
Pour le service client, les retours ou toute question technique, merci d’appeller le service technique de Saniflo
au numéro suivant : 800-877-8538 (CDN).
This product must be installed in strict accordance with local plumbing codes.
Product should be installed by a licensed plumber.
Le produit doit être installé dans le respect des règlements sanitaires locaux.
Le produit doit être installé par un plombier qualifié.
El producto debe ser instalado en estricto acuerdo con los códigos locales de plomería.
El producto debe ser instalado por un plomero con licencia.
USA CDN

SFA SANISHOWER Specifications

General

Brand	SFA
Model	SANISHOWER
Category	Water Pump
Language	English

Summary

Important Additional Information

Introduction

Overview of product quality certification and adherence to installation instructions.

General Description

Details the drain pump unit as a residential system for gray water collection and disposal.

Installation Advice

Guidance on unit positioning, pipe connections, discharge line requirements, and installation best practices.

Normal Operating Cycle

Explanation of how the unit operates, from water entry to waste discharge via the impeller and motor.

Connection of the Discharge Pipe

Steps for connecting the discharge elbow, check valve, and rubber coupling to the pump's outlet pipe.

Connection to a Vent System

Instructions for connecting the unit to a vent system as per local plumbing codes, including sealing.

Connection of Sanitary Fixtures

Connection to the Electrical Supply

Activating the Unit and Usage

Access to Main Components

Return and Repair of the Unit

Maintenance

Limited Warranty

Terms and Conditions

Outlines the conditions for warranty coverage, including proper installation and reporting.

Part or Product Exchange

Details the process for exchanging a product, requiring an authorized return number and proof of purchase.

Limitations

Specifies what is not covered by the warranty, such as labor costs and consequential damages.