SFA SaniAccess 3 User Manual

C
US
SANI
3
The user should retain these instructions for future reference
À lire attentivement et à conserver à titre d’information
IMPORTANT
DO NOT RETURN ANY MERCHANDISE TO THE VENDOR
NE PAS RETOURNER DE MARCHANDISE AU VENDEUR
For customer Service, Returns or Technical Questions, please call Saniflo’s Technical support toll-free at
800-571-8191 (USA) or 800-363-5874 (CDN).
Pour le service client, les retours ou toute question technique, merci d’appeller le service technique de Saniflo
au numéro suivant : 800-571-8191 (USA) or 800-877-8538 (CDN).
This product must be installed in strict accordance with local plumbing codes.
Product should be installed by a licensed plumber.
Le produit doit être installé dans le respect des règlements sanitaires locaux.
Le produit doit être installé par un plombier qualifié.
USA CDN
SANIACCESS3
252
10.11

SFA SaniAccess 3 Specifications

General

Motor Speed	2800 RPM
Horizontal Pumping Distance	100 m
Normal Operation	Continuous
Voltage	230 V
Protection	IP68
Maximum Fluid Temperature	40°C
Cutting System	Vortex

Summary

Access to Blade System

Blade System Access Steps

Access to Pressure Sensing System

Pressure Sensing System Access Steps

Important Additional Information

Installation Advice and Guidelines

Critical advice for proper installation, including positioning, pipe connections, discharge, and avoiding damage from improper waste.

Toilet Assembly and Connection

Instructions for assembling the toilet, connecting it to the macerating unit, and securing it to the floor.

Normal Operating Cycle and Connections

Discharge Pipe Connection

Detailed steps for connecting the discharge pipe, including specific fittings, hoses, and clamps for different pipe types.

Vent System Connection

Guidelines for connecting the macerating unit to a vent system according to local plumbing codes.

Connection of Sanitary Fixtures

Information on connecting other sanitary fixtures like sinks or bathtubs to the macerating unit's side inlets.

Electrical Supply Connection

Requirements for connecting the unit to a 120V, 15 amp GFCI-protected electrical outlet, emphasizing safety.