EasyManua.ls Logo

SG GROUP 3100W - Engine startup; Engine Startup Procedure

Default Icon
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10
English
5 Engine startup:
Always before starting up the engine, make sure that there are no devices
plugged into the generator.
1 Turn the aerator lever of the fuel cap completely to the right ("ON" position).
This allows air to enter the reservoir to occupy the space of the gasoline
consumed by the engine.
During the first start up or if the group wasn't started up recently, open the
aerator and wait for a couple of minutes to ensure that the reservoir is taking air
and the gasoline is able to reach the carburetor.
NOTE: If the equipment is started without opening the aerator, the tank will
not intake are and a vacuum will be created in the reservoir, which will prevent
the passage of gasoline toward the engine.
WARNING: When moving or storing the generator, turn the ventilation lever
of the fuel cap to the "OFF" position.
2 Turn the gasoline shutoff valve to Open, "ON".
AERATOR
GASOLINE VALVE

Table of Contents