Common Problems
1. It is recommended to use DC5V 2A adapter. Using the adapter with
higher voltage may damage M6.
2. Unable to start M6, it may be caused by low power or exhausted
battery, please recharge and then start up again.
3. In the case of system freezing or crashing, please press and hold the
Power button for 12 seconds to force a shutdown. To power on after
forced shutdown, press and hold the Power button for 12 seconds.
4. If there is noise from headphones, headphone's output interface may
not be connected correctly, please try to insert it again.
5. When there is no sound, try to use different pair of headphones or
different cable and make sure the system volume is set correctly.
Quick start guide: 1 USB A to Type-C cable: 1
Warranty card: 1 Front & rear protective film: 1
Attached Accessories
To Next Page
Loading...
