How to fix a blockage in the brushroll of a Shark Vacuum Cleaner?
If the brushroll of your Shark Vacuum Cleaner is blocked, remove any debris from around and inside the brushroll, ensuring it can spin freely.
How to fix a stuck side brush on a Shark AI ULTRA 2600WD Vacuum Cleaner?
To resolve a stuck side brush on your Shark Vacuum Cleaner, remove any debris around the side brush to allow it to move freely.
How to recharge a Shark Vacuum Cleaner with critically low battery?
If your Shark Vacuum Cleaner robot's battery is critically low, pick it up and place it on the base. Ensure the base indicator light turns blue, confirming correct placement.
What to do if the fluid reservoir is empty on a Shark AI ULTRA 2600WD?
If the fluid reservoir of your Shark Vacuum Cleaner is empty, refill it with water or VACMOPTM solution before restarting.
What to do if the Shark AI ULTRA 2600WD suction motor fails?
If your Shark Vacuum Cleaner's suction motor isn't working, you should remove and empty the dust bin, clean the filters, remove the brushroll and brushroll door, and clear any blockages.
What to do if my Shark Vacuum Cleaner robot is stuck?
If your Shark Vacuum Cleaner robot is stuck, move it to a new location and ensure the front bumper moves freely in and out.
What to do if Shark AI ULTRA 2600WD Vacuum Cleaner robot is stuck on an obstacle?
If your Shark Vacuum Cleaner robot is stuck on an obstacle, move it to a new location on a level surface.
How to reinstall the dust bin on a Shark AI ULTRA 2600WD Vacuum Cleaner robot?
If your Shark Vacuum Cleaner robot dust bin needs to be reinstalled, insert the dust bin until it clicks into place.
What to do if the front bumper of my Shark AI ULTRA 2600WD Vacuum Cleaner is jammed?
If the front bumper of your Shark Vacuum Cleaner may be jammed, clean the bumper and ensure it moves in and out without obstruction.
How to fix a Shark Vacuum Cleaner robot error during booting?
If your Shark Vacuum Cleaner robot has encountered an error while booting, turn the power off and then back on.
General| Brand | Shark |
|---|---|
| Model | AI ULTRA 2600WD Series |
| Category | Vacuum Cleaner |
| Language | English |
Basic electrical appliance safety and component warnings.
Prohibitions on usage, objects, and areas for the robot.
Guidelines for safe battery charging and handling.
Guidance on using no-go zones for reflective surfaces and stairs.
Safety information regarding the Class 1 laser system.
Instructions for selecting a permanent location for the charging dock.
Step-by-step guide to attach the side brush to the robot.
How to charge the robot completely before first use.
Explanation of indicator lights during charging and idle states.
Overview of buttons, indicator lights, and manual cleaning modes.
Obstacle removal, threshold management, and stair preparation.
Explore run, object detection, and no-go zones for mapping.
How to attach the mop pad to the reservoir.
Instructions for filling the reservoir with water and solution.
Using app to identify carpets and avoid them during mopping.
App features, voice setup, and Wi-Fi troubleshooting.
How to remove, empty, and clean the robot's dust bin.
Instructions for cleaning or replacing the robot's filter.
Cleaning brushroll, sensors, and charging contacts.
Cleaning side brush and maintaining reservoir/mop pad.
How to clean the robot's front wheel and drive wheels.
Information on ordering replacement parts and filters.
List of error codes and their corresponding solutions for robot issues.
Legal terms for using SharkNinja software and applications.
Legal terms, warranty details, exclusions, service, and claim procedures.
Registration, record keeping, performance, and FCC warnings.
Guidelines for safe battery removal, recycling, and disposal.
Reminder to keep the owner's guide for future reference.
To Next Page