Please be sure to read the enclosed Shark® Owner’s Guide prior to using your unit.
ASSEMB LY
A
Vacuum Pod
B
Motorized Floor Nozzle
C
Handle & Hose
D
Wand
E
Double Accessory Holder
F
12” Crevice Tool
G
Upholstery Tool
H
Pet Power Brush
WHAT’S INSIDE
ZU572_QSG_REV_Mv4
QUICK START GUIDE
F
H
G
Attach
your
desired
accessories
3
(Click)
4
(Click)
5
(Click)
6
(Click)
C
D
E
2 WAYS TO CLEAN
UPRIGHT
Power/Surface switch
Press switch to select
surface setting or to turn
o power. To engage
brushroll, step on floor
nozzle and tilt handle back.
Suction Control
Slide to MIN to increase
maneuverability on carpets.
Slide to MAX for more
suction on bare floors.
LIFT-AWAY®
Lift-Away Release
Handle Release
Press release
buttons to lift pod
o nozzle, or to
release handle or
wand.
Wand Release
Attach accessories
to handle or wand.
For additional parts
and accessories, visit
sharkaccessories.com
1. Insert double accessory holder into the side
of the pod above the Lift-Away button.
2. Place pod onto floor nozzle post.
3. Insert wand into pod.
4. Insert handle into wand.
5. Attach hose clip to wand.
6. Connect hose to back of pod.
NOTE: For proper operation, ensure
all parts are firmly CLICKED into place.
2
(Click)
1
(Click)
A
B
LIFT-AWAY® Pet with
Self-Cleaning Brushroll
To Next Page
Need help?
General
