CLEANER HEAD
Please be sure to read the enclosed Shark® Owner’s Guide prior to using your unit.
ASSEMB LY
A
Vacuum Pod
B
Motorized Floor Nozzle
C
Handle & Hose
D
Wand
E
8" Crevice Tool
F
Upholstery Tool
WHAT’S INSIDE TIPS
MAINTENANCE
ZU620_QSG_EB2_Mv1_191107
QUICK START GUIDE
Empty the dust cup after each use.
TIP:
Rinse foam and felt
filters every 3 months,
and HEPA filter every
year.
Rinse filters with water
only and allow them
to air-dry completely.
Tap loose dirt from
foam filters as needed
between washes.
Note: The foam filter
may discolor over time.
This is normal.
POWERED
LIF T-AWAY
®
SPEED
A
D
C
E F
Slide hose clip
into back of wand
for convenience.
To store your vacuum, wrap
cord around cord hooks.
For quick cord access,
rotate upper hook down
and remove cord.
For additional parts and accessories,
visit sharkaccessories.com
Attach onboard
accessories
(Connect)
OR
Locks
(Click)
(Click)
(Click)
B
(Click)
with Self-Cleaning Brushroll
Using a coin, turn locks
counterclockwise to
open, then lift o cover
to access brushroll.
Replace cover,
pressing down
firmly on all sides
before turning locks
clockwise to close.
Clear blockages
from airway.
Self-Cleaning Brushroll
The self-cleaning brushroll automatically
removes hair wrap. If some hair or debris
remains after continued use, remove the
cover to access the brushroll.
To Next Page
Need help?
General
