Shark Rotator Professional Lift-away nv501 User Manual

Please be sure to read the enclosed Shark® Owner’s Guide prior to using your unit.
ASSEMB LY
A
Handle
B
Hose
C
Wand
D
Vacuum Pod
E
Motorized Floor Nozzle
F
12” Crevice Tool
G
Dusting Brush
WHAT’S INSIDE ATTACH ONBOARD ACCESSORIES
MAINTENANCE
NV500_QSG_REV_Mv3
QUICK START GUIDE
Empty the dust cup after each use.
TIP:
Wash foam and felt
filters every 3 months.
Rinse with water only
and allow to air-dry
completely before
reinstalling. Tap loose
dirt from filters as
needed between
washes.
Note: The foam filter
may discolor over time.
This is normal.
1
(Click)
4
(Click)
2
(Click)
3
(Click)
A
C
D
E
B
F
G
5
(Click)
6
(Click)

Shark Rotator Professional Lift-away nv501 Specifications

General

Style	upright vacuums
Color	red
Floor Type	carpet
Dust Bin Capacity	0.4 gallons
Cord Length	29.5 feet
Carpet Height Adjustments	no
Automatic Cord Rewind	no
Filter	hepa media
Washable Filter	yes
Pet Mode	yes
Brush Roll Shut-Off	yes
Bagless	yes
?leaning Area	9.5 inches
Brushes and Accessories	dusting brush; crevice tool; pet upholstery tool; straight nozzle; power pet brush
Voltage	120 volts
Current	10 amperes

Weight and Dimensions

Length	12.2 inches
Height	45.7 inches
Width	13.4 inches
Net Weight	15.4 pounds

Summary

What's Inside

Assembly

Main Assembly Steps

Connect the vacuum pod, wand, hose, and floor nozzle for initial setup.

Attach Onboard Accessories

Connecting Accessories

Attach cleaning tools like the crevice tool or dusting brush to the wand or handle.

Maintenance

Dust Cup Emptying

Empty the dust cup after each use by releasing and removing it.

Filter Cleaning

Wash foam and felt filters every 3 months; rinse and air-dry completely.

Ways to Clean

Upright Cleaning Modes

Use upright mode for bare floors or carpets, adjusting suction and brushroll as needed.

Lift-Away Cleaning

Detach the vacuum pod for portable cleaning, attaching accessories to the handle or wand.