Shark CarpetXpert - Hose and Tank Operations; Hose Assembly; Cleaning Solutions and Tank Filling

9sharkclean.co.uk8 sharkclean.co.uk
TIP: Wrap hose tightly,
leaving no slack
HOSE ASSEMBLY SHARK® CLEANING SOLUTIONS AND TANKS
6
Align the grooves in the hand
tool with the grooves in the
holder, then slide the tool
down to attach.
5
Loop hose tightly under the
bottom tab.
4
Press hose into second clip.
1
Insert hose tightly into back
of unit until it clicks twice to
avoid leaks.
2
Loop hose tightly into hose
holder opening.
3
Press hose into first clip.
Use ONLY Shark branded cleaning
solutions. Taking care to use the
CarpetXpert/StainStriker formulas
in the correct tanks. Unit is not
compatible with other solutions
or cleaners.
Filling the CarpetXpert Tank (top clear tank)
1. Lift the CarpetXpert Tank by the handle to detach it,
then remove the cap.
2. Add warm water to the tank up to the WATER fill line.
Do not use water hotter than 60°C (140°F).
3. Add Shark Deep Clean Pro up to the CONCENTRATE
fill line.
4. Reattach cap, then reinstall the CarpetXpert Tank,
hearing a ‘click’ once installed properly.
Filling the StainStriker Tank (smaller, cyan tank)
1. Lift the StainStriker Tank by its sides to detach it,
then remove the cap.
2. Add Shark OXY Multiplier up to the MAX FILL line.
3. Reattach cap, then reinstall the StainStriker tank,
hearing a ‘click’ once installed properly.
To order refills of
Shark® Deep Clean Pro and
Shark® OXY Multiplier
scan the QR code.
2
1
SHARK CLEANING SOLUTIONS
FILLING THE TANKS
Shark Deep Clean Pro
For deep-cleaning carpets
with the brushroll
Shark OXY Multiplier
For stain cleaning with the
hand tool, combines with
Deep Clean Pro to help
eliminate tough stains.