Shark Navigator Swivel Pro Complete User Manual

Remove dust cup to access foam
and felt filters. To remove HEPA
filter, press down on top of filter
door, then tilt and lift out door.
Press tab at top of HEPA filter and
pull out filter.
To reinstall, insert HEPA filter into
unit and replace the filter door.
Rinse foam and felt filters every
month to keep the suction strong.
Rinse HEPA filter every year.
Rinse filters with water only and allow them to air-dry
completely before reinstalling. Between washes, tap loose
dirt from filters as needed.
Please be sure to read the enclosed Shark® Owner’s Guide prior to using your unit.
ASSEMB LY
A
Vacuum Pod
B
Handle & Hose
C
Wand
D
Hose Holder
E
5.5" Crevice Tool
F
Dusting Brush
G
Upholstery Tool
WHAT’S INSIDE EMPTYING THE DUST CUP
MAINTENANCE
QUICK START GUIDE
Empty the dust cup after each use.
clean
A
BC
F
G
D
E
Brushroll access
Unlock Open Cover Clear Intake
Use a coin to turn the locks counterclockwise until they click
open, then lift the cover to access the brushroll. Clear the
debris intake.
(Click)
(Click)
(Click)
(Click)
NOTE: For proper operation, ensure all parts
are firmly CLICKED into place.
SWIVEL PRO COMPLETE
HEPA
Filter
Filter
Door
Foam
Felt

Shark Navigator Swivel Pro Complete Specifications

General

Type	Upright
Swivel Steering	Yes
HEPA Filter	Yes
Anti-Allergen Complete Seal	Yes
Cord Length	25 feet
Power Source	Corded Electric
Attachments	Crevice Tool, Dusting Brush
Warranty	5 years
Features	Lift-Away Technology

Summary

Assembly and Components

Dust Cup Emptying

Vacuum Maintenance

HEPA Filter Removal and Reinstallation

Steps for removing and reinstalling the HEPA filter, including accessing the filter compartment.

Filter Cleaning Instructions

Guidance on rinsing foam, felt, and HEPA filters monthly or annually for optimal suction.

Brushroll Access and Clearing

Instructions on how to open the brushroll cover using a coin to clear debris from the intake.

Cleaning Modes

Floor Cleaning Operation

How to select the correct setting (Hard Floor or Carpet) for effective floor cleaning.

Above-Floor Cleaning Setup

Steps to disconnect parts and attach accessories for cleaning areas above the floor.