Shark GS300 - Using Garment Steamer Accessories; Steam Bonnet Usage; Bristle Frame Usage

7www.sharkclean.com
fig. 9
fig. 8
STEAM BONNET
1 The steam bonnet protects your
fabrics from water marks and
filters impurities from the water.
Attach the steam bonnet to the
steam nozzle. Attach the left side
of the bonnet over the nozzle and
stretch the bonnet across the
nozzle securing the right side of
the bonnet. (fig. 8)
2 To remove the bonnet, pull the
purple tab from the edge of the
bonnet and pull off.
IMPORTANT: The bonnet should
be in place at all times.
BRISTLE FRAME
1 The bristle brush frame provides
deep steam penetration for heavy
weight fabrics (denim, canvas,
cotton, etc.). It should be attached
over the steam bonnet.
2 The bristle frame should be
attached over the steam bonnet.
The bristles of the frame should
be on top of the steam nozzle.
Attach the two bottom tabs to the
steam nozzle, then lock in place
with the tab on the top of
the frame. (fig. 9)
USING YOUR ACCESSORIES
ENGL ISH
GS300_IB_ENG_SPA_101110.indd 7 10-11-11 9:58 AM