7
C
D
E
F
However, it is essential on purchase to adapt
the length of the chin strap to your measure-
ments. Adjust the length of the strap using
the adjusting buckle (Figs. A, B, C and D).
Choose your EvoOne helmet and attach the
holding system. When the “Precise Lock” is
adjusted to the medium position, the chin
strap must be correctly tensioned under the
chin to hold the helmet firmly without cau-
sing you any discomfort or pain.
To fasten the chin strap, all you have
to do is to thread the tongue into its place
on the buckle until tension is perfect (Fig. E).
The tongue connects and is automatically
blocked.
To release the chin strap, you have to pull on
the lever (Fig. F) and remove the tongue from
the buckle. Although the notched tongue
enables you to change the adjustment pre-
cisely on each use, it is important to check
frequently that the adjustment of the strap
length is correct.
WARNING! never ride with the chin strap
loose or insufficiently tightened. Even though
the interior padding gives you the impression
of being held, your helmet risks coming off
in a fall.
Never apply lubricating or acid products
or grease or solvents to the chin strap
buckle parts.
To Next Page
Loading...
Need help?
General
