EasyManuals Logo

Shark Nano User Manual

Shark Nano
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #16 background imageLoading...
Page #16 background image
OPEN CLOSE
EASYFIT • VENTILATIONS
EASY FIT
Your helmet Shark Nano has been designed
to provide additional comfort for eyeglasses
wearers with the EASY FIT SYSTEM.
The 2 cheeks are made in order to provide an
easiest passage to the glasses arms.
SYSTEM OF AERATION
Upper ventilation:
The upper air intake (Fig. A) allows air to
enter onto the upper part of the head and
thus renew the air in the head section. The
channels incorporated in the internal shock
absorbers facilitate the circulation of air
over the surface of the head.
The quality and design of the textile comfort
parts contribute to the proper distribution
of air. The position of the upper ventilation
system is designed to optimise the effec-
tiveness of its intake of air. Depending on
the type of your motorbike, the fairing may
reduce the effectiveness of this ventilation.
The ventilation is in the open position
when pushed backwards and closed when
pushed forwards (Fig. B).
WARNING! Do not open or close any
vents while operating your motorcycle.
You could lose control of your motorcycle,
resulting in an accident, personal injury or
death.
5-YEAR WARRANTY
You have recently purchased a SHARK helmet for
your safety and pleasure. It has been designed with
the greatest
care to satisfy your every requirement. For your safety,
and that of your passenger, you must respect all the
rules of prudence when using your two-wheeled
vehicle. The SHARK 5-YEAR warranty guarantees the
initial purchaser
that any possible manufacturing fault or material
defect will be covered by the SHARK warranty.
LIMITATIONS
If during the warranty period (5 years as from the
date of purchase), a problem covered by the war-
ranty were to arise, SHARK, through the intermediary
of its sales network, undertakes to repair or replace
any defective components, up to a maximum limit
which is the purchase value of the helmet. Any labour
costs are normally paid by the SHARK network, but
are submitted for approval prior to the work being
carried out. If the repair requires components to be
dispatched incurring transportation costs, the SHARK
network shall cover these costs up to a limit which is
the cost of transport by the national postal service at
the normal rate.
EXCLUSIONS
This warranty only covers problems related to mate-
rials or manufacturing. SHARK cannot be held liable
with regard to the product in the following cases :
Any damage following
1) a fall or accident
2) a technical modification made by the user or a third
party (glue, adhesives, paint, screws, etc.)
3) use of or contact with: harmful chemical products
(including methylated spirits on the visor treatments),
or an intense heat source
4) incorrect use: abnormal conditions (e.g. underwa-
ter), lack of maintenance or care
5) ageing due to normal wear of the inner fabrics or
foams, the appearance of the external parts, or the
visor (scratches, marks, etc.)
6) abnormal and prolonged exposure to ultra- violet
light, in particular for the decorative colours. In addi-
tion, SHARK cannot consider subjective considera-
tions related to use of the helmet as defects covered
by the warranty:
problems with comfort, size, noise or whistling, aero-
16

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Shark Nano and is the answer not in the manual?

Shark Nano Specifications

General IconGeneral
BrandShark
ModelNano
CategoryMotorcycle Accessories
LanguageEnglish

Related product manuals