Shark Navigator DLX Quick Start Guide

Please be sure to read the enclosed Shark® Owner’s Guide prior to using your unit.
ASSEMB LY
A
Vacuum Pod
B
Motorized Floor Nozzle
C
Handle Assembly
D
Flexible Hose
E
Extension Wand
F
Upholstery Tool
G
5.5” Crevice Tool
WHAT’S INSIDE EMPTYING THE DUST CUP
MAINTENANCE
QUICK START GUIDE
Empty the dust cup after each use.
Cleaning the Brushroll
1 Detach the pod from
the floor nozzle.
2 Remove any blockages or buildup
from the airways in the nozzle.
Carefully cut away any fibers,
hair, or string wrapped around
the brushroll. Avoid damaging or
cutting the bristles.
Post-Motor
Filter
Foam
Felt
A
B
C
D
F
G
E
1 2
4 5 6
3
(Click)
(Click)
(Screw)
(Click)
(Click)
(Wrap)
(Click)
(Click)
DLX
Wash foam and felt filters
every 3 months and the
post-motor filter once a year
to keep the suction strong.
Rinse filters with water
only and allow to air-dry
completely. Tap loose dirt
from filters as needed
between washes.

Shark Navigator DLX Specifications

General

Type	Upright
Cord Length	25 feet
Swivel Steering	Yes
Bagless	Yes
Power Source	Corded electric
Filtration	HEPA filter
Attachments	Crevice Tool, Dusting Brush
Special Features	Lift-Away technology
Weight	15.2 lbs