16
TEXTILE PARTS
1. Begin the operation by threading the plastic
part of the front of the headgear in its accom-
modation (Fig. 1) by beginning with one of the
sides (arrow 1)
2. Position the textile correctly
3. Go back up of the back part of the headgear
(Fig.2-3)
4. Go back up adorns him nape of the neck by
inserting one of its side parts, and then posi-
tion him correctly in the accommodation.
5. Reposition the small cushions of cheek by
making cross the belt of chin strap in the crack
of froths (Fig. 4)
6. Fix the pressure and then the Velcro strip
(Fig 5).
assembly
1
3
4
2
5
To Next Page
Loading...
