7
CHIN STRAP MICROMETRIC BUCKLE
C
D
E
Choose your SHARK Nano or SHARK Raw and
attach the holding system. When the “Precise
Lock” is adjusted to the medium position, the chin
strap must be correctly tensioned under the chin
to hold the helmet firmly without causing you any
discomfort or pain.
To fasten the chin strap, all you have to do is to
thread the tongue into its place on the buckle until
tension is perfect (Fig. B).
The tongue connects and is automatically blocked.
To release the chin strap, you have to pull on the
lever and remove the tongue from the buckle.
Although the notched tongue enables you to
change the adjustment precisely on each use, it is
important to check frequently that the adjustment
of the strap length is correct.
Warning: never ride with the chin strap loose or
insufficiently tightened. Even though the inte-
rior padding gives you the impression of being
held, your helmet risks coming off in a fall.
Never apply lubricating or acid products or
grease or solvents to the chin strap buckle
parts.
To Next Page
Loading...
Need help?
General
