The Shark
®
Rocket
®
Powerhead has a 2-speed POWER slider switch on the handle.
SUCTION RELEASE
This unit has a Suction Control Button to help
with push and pull on high-pile carpets and to
release suction when vacuuming area rugs� Open
to minimize suction� Be sure to close again for
maximum suction�
LO HI
Brushroll spins quickly
Less Suction
open
More Suction
closed
www.sharkrocketpowerhead.com
5
USAGE
• LO - For Gentle on hard floors and area rugs
• HI - For deep-cleans carpets by removing embedded dirt
NOTE: For deep cleaning per ASTM F 608 (embedded dirt in carpets)
please use the carpet brushroll on HI setting with the SUCTION CONTROL close
�
1 Plug the unit into an electrical outlet�
2 Slide the POWER switch to the LO position to gently clean hard floors and area rugs� The Brushroll will spin slowly�
3 Slide the POWER switch to the HI position to deep-clean carpets by removing embedded dirt� The Brushroll will spin quickly�
NOTE: Before vacuuming your delicate area rugs or carpets, refer to the manufacturer’s recommended cleaning instructions�
Brushroll spins slowly
Deep Clean Carpet Brushroll
327FFJ452
The Deep Clean Carpet Brushroll can be used
on all floor types� It is optimized for deep
carpet cleaning�
CHOOSING THE APPROPRIATE SETTING
To Next Page
Loading...
Need help?
General
