Stand the vacuum upright. Step on the
foot pedal and pull the wand up
to disconnect it from the motorized
floor nozzle.
Press the Wand Release button on the
top of the wand to disconnect it from
the handheld vacuum.
Attach desired cleaning accessory. Attach desired cleaning accessory.
STEP 1 STEP 1
STEP 2 STEP 2
Wand
Release
STORAGE
TIP: If your unit came with an
accessory bag, you can hang the bag
on the wall mount with the vacuum.
Press the Wand Release button on the
top of the wand to release the handheld
vacuum. Align the catch on the
bottom of the handheld vacuum with
the storage hook on the wand. Slide
handheld vacuum down so that it hangs
from the storage hook. Wrap the cord
around the two cord hooks.
OPTION 1
Handheld
Vacuum Catch
Handheld Vacuum
Storage Hook
Use the included wall mount.
Drill two
5/16" holes and insert plastic anchors*
into the wall. Using a Phillips-head
screwdriver, screw the wall mount into
the plastic anchors. Hook the catch on
the bottom of the handheld vacuum
onto wall mount.
* Plastic anchors and screws sold
separately.
OPTION 2
To Next Page
Loading...
Need help?
General
