Please be sure to read the enclosed Shark® Owner’s Guide prior to using your vacuum.
A
Handheld Vacuum
B
Zero•M Cleaner Head
C
Wand
D
5˝ Crevice Tool
E
Pet Multi-Tool
F
Precision Duster
G
Onboard Tool Clip
H
Wall Mount
WHAT’S INSIDE
ZS352_QSG_REV_Mv1
D E F
QUICK START GUIDE
Corded Ultra-Light Vacuum
H
Rocket
®
CLEANER HEAD
™
G
ASSEMBLY
(Click)
(Click)
1 2
A
B
C
STORAGE
MAINTENANCE
Hang the handheld vacuum
on the hook on the bottom
of the wand, and wrap the
power cord around the
cord hooks.
Please see included
instruction sheet for
wall mount installation
information.
Onboard Hook Wall Mount
Dust Cup
Empty dust cup every time debris reaches the MAX fill line.
Empty
Dust Cup
Release
Cleaner Head maintenance
Zero-M Technology actively removes hair wrap from your
brushroll while you vacuum.
1. Using a coin, turn locks counterclockwise to open, then lift o
cover to access Brushroll.
2. Clear airway of blockages.
3. Replace cover, pressing down firmly on all sides before turning locks
clockwise to close.
NOTE: If you see any hair wrapped around the brushroll, continue cleaning,
using Setting II, High Pile Carpets, on bare floors. This will allow Zero-M™
technology to remove the hair wrap and send it to the dust cup.
To Next Page
Need help?
General
