Shark Rotator NV552 - Checking for Blockages; Floor Nozzle Blockage Check

21
1-800-798-7398
1 Using a coin, turn the
screws to the unlock
position and pull up
to expose the airway.
Remove the blockage.
CHECKING FOR BLOCKAGES
2 Remove any string, hair
or debris that may be
wrapped around the
brushroll.
WARNING: To reduce
the risk of shock and
unintended operation,
turn power off and
unplug unit before
servicing.
WARNING: Do not cut
anything but the hair,
fibers, or string that is
on the brushroll.
TIP: You can also check
for blockages in the hose
and tubes. Just remove
floor nozzle, dust cup and
hose and shine a flashlight
in the openings.
STEP 1 STEP 2
BOTTOM OF FLOOR NOZZLE